Q69 Series Automatic Shot Blasting Machine for H Beam Steel Plate
“Q69” series automatic shot blasting machines are designed for
continuous blasting of plates and profiles, and also welded
constructions. Special attention has been paid to the positioning
of turbines that provide the optimum efficiency and uniform
cleaning of work pieces. Plates or profiles are loaded onto an
input roller conveyor that transports work pieces through the
tunnel part of the machine. On the outer brim of the tunnel’s shot
blasting part, there are turbines that provide optimum cleaning of
work pieces from the top and bottom side. Work pieces go on through
the chamber for removing the shot blasting agent off the top
surface, finally reaching the output roller conveyor.
- “Q69” series automatic shot blasting machines are designed for shot
blasting plates of all standard widths and lengths, and they are
also suited for blasting standard profiles of any dimension.
- Special machine variants also allow the shot blasting of welded
- “Q69” series automatic shot blasting machines provide continuous
regulation of operating speed and, if required, also the regulation
of steel shot flow. Shot blasting is turned on automatically, when
work pieces travel under turbines.
- All machines are equipped by standard with a blow-off fan for
removing steel shot from the top surface of work pieces, whereas in
larger surface areas greater effect is achieved by using a rotation
- There is a selection of machines available with different sizes of
workspace and with numerous optional accessories, which allow us to
adjust our machines to the needs of even the most demanding
- Due to quality and robust production, our machines are designed to
operate in the most demanding environments, such as rolling mills,
The features of Q69 series automatic shot blasting machine:
1.Steel plate, H beam steel structure shot blasting machine has
three kinds of pass through type: Roller conveying pass through,
trolley pass through, hanger pass through.
2. They are widely used in the industry of steel structure,
engineering machinery, bridge building and so on. By shot blasting,
it can remove rust, oxide layers, welding slag and other pollutant
and eliminate surface stress force.
3. After shot blasting, it can improve paint film adhesion with
steel, improve anti-rust capacity, improve the quality and prolong
the service life of steel structure.
4. The steel shots blasted by blasting turbines will be collected,
purifying by shots circle system and continue to be used again for
5. The working process flow of shots circle system: steel shots
blasted by blasting turbines will be collected by portrait screw
conveyor and delivered to bucket elevator then the bucket elevator
will lift to air wash type separator.
6. After separating, the dust and broken steel shots will be
removed away from steel shots and good steel shots will enter
|The effective cleaning width (mm)||800||1200||1500||2000||2500||3000||4000|
|The entrance size(mm)||1000*400||1400*400||1700*400||2200*400||2700*800||3200*800||4200*400|
|The length of cleaning workpiece (mm)||1200-12000||1200-1600||1200-12000||1200-12000||3000-12000||2400-12000||4500-18000|
|The speed of conveyor (m/min)||0.5-4||0.5-4||0.5-4||0.5-4||0.5-4||0.5-4||0.5-4|
The thickness of cleaning
steel sheet (mm)
|The section steel specification(mm)||800*300||1000*300||1500*300||2000*300||2500*700||3000*700||4000*300|
|The quantity of shot blasting(kg/min)||4*180||4*250||4*250||6*250||6*250||6*360||8*360|
|The first enclosed quantity(kg)||4000||4000||4000||4500||4500||8000||11000|
|Roll brush adjusting height(mm)||200||200||350||450||600||850||900|
|Total power (kw)||90||78.3||113.5||156.6||204.8||224.55||293.6|
- Reply your inquiry within 12 hours.
- Experienced staffs answer all your questions in time.
- Customized design is available.
- Exclusive and unique solution can be provided to our customer by
our professional engineers and staff.
- Special discount and protection of sales are provided to our